Main Menu


  1. You can walk on your new Hybrid flooring during or immediately after installation. Ensure that temperature in the installation rooms is always above 5°C and below 35°C.
  2. For dry maintenance, we advise a soft broom or vacuum cleaner. Make sure the vacuum cleaner is equipped with soft wheels and use bristles down to avoid scratches on your new floor. It is important to understand that steam mops or wet mops are not recommended for any hard surface floor covering. Steam cleaners and wet mops however are permitted on Hybrid flooring. If using a steam cleaner, please ensure that a cloth covers the direct steam pressure on any device as this will help an even distribution of steam and heat. Keep the steam cleaner moving during cleaning and, for best results, clean the floor in the same direction as the planks have been installed.
  3. For slightly damp and wet maintenance, we advise to use the recommended cleaning and maintenance kit (Quick
    Step Cleaning Kit). Be aware that the use of other cleaning products might damage your floor.
  4. General spot cleaners are suitable for removal of most marks. Wipe up spills and stains as quickly as possible.
  5. Protect furniture and chair legs and the underside of any moving furniture using felt floor protectors. Avoid bringing dirt, water and sand indoors by providing a suitable dirt trapping mat at all external entrances. Ensure that office
    chairs or chairs with castor wheels are fitted with soft wheels that are suitable for hard floors and/or use a suitable vinyl protective desk mat.
  6. Never drag items of furniture over the floor but lift them up, especially when moving appliances back into position.
  7. The smooth surface of your Hybrid flooring will retain very little dust or dirt. Remove stubborn stains carefully with a citrus based cleaner or eucalyptus oil. Never use scouring products. Never use wax or varnish coating on the floor.